User level : Beginnershey geek'z, this article has some of the basic information to get started with linux networking. . here we go. .These stuffs are automatically performed during a Linux …
Activating and De-Activating NIC Interface
User level : BeginnersThe ifup and ifdown commands can be used respectively to activate and deactivate a NIC interface. You must have an ifcfg file in the /etc/sysconfig/network-scripts …
Changing your IP address
User level : BeginnersIf you need, you could change the IP address of eth0 interface using the ifconfig command.command : ifconfig eth0 10.0.0.1 netmask 255.255.255.0 upeth0 is the …
Determining Current Routing Table
User level : BeginnersThe netstat -nr command is used to show the contents of the touting table. Networks with a gateway of 0.0.0.0 are usually directly connected to the interface. The route …
How to Change your Default gateway
User level : BeginnersYour server needs to have a single default gateway. DHCP servers will automatically assign a default gateway to DHCP configured NICs, but NICs shall be configured staticly …
How to Remove Desktop Item Icons (My Computer, Recycle Bin…)
Removing Desktop Item Icons (My Computer, Recycle Bin…)Hey geeks, here's another stuff for you guys to play with, go out and try with some of your friends system. . remove stuff let them …